
Crodasone Cystine and Crodasone W are both heat-activated silicone copolymers from Croda that cross-link on drying into a protective film on the hair, but they are built on different backbones and behave very differently in a formula. Crodasone Cystine is the amino acid cystine joined to a silanetriol (INCI Cystine Bis-PG-Propyl Silanetriol, supplied in water at about pH 9.5), while Crodasone W is hydrolyzed wheat protein joined to a silanetriol (INCI Hydrolyzed Wheat Protein PG-Propyl Silanetriol, effective pH 4.0 to 5.0). Choose Cystine for perms, smoothing systems, curl retention and alkaline or anionic bases, and choose W, or its pea sister Crodasone P, for acidic conditioners and blow-dry protection sprays.
Most pages on Crodasone describe one grade in isolation. This one compares the range using the figures Croda publishes.
What the Crodasone name actually covers
Crodasone is the Croda family of protein and amino acid copolymers with a reactive silicon group. In every grade, a protein fragment or amino acid is chemically linked to a propyl silanetriol through a hydroxypropyl bridge, which is where the PG-Propyl Silanetriol part of the INCI name comes from. The silanetriol end carries three silanol groups. As the hair dries, and faster when heat is applied, those silanols condense with each other and form a thin, flexible network. The protein or amino acid part gives the network its affinity for keratin, and the silicone part gives slip and shine. Croda describes the result as heat-activated cuticle defence.
Three grades come up most often in searches. Crodasone Cystine uses the sulfur amino acid cystine, the same building block that forms the disulfide bonds inside hair keratin. Crodasone W uses hydrolyzed wheat protein. Crodasone P uses hydrolyzed pea protein and is the vegan, plant-derived option that Croda positions specifically against cuticle cracking from blow-drying. Croda also sells Keravis PE, which is chemically a close relative with the INCI Aqua (and) Hydrolyzed Vegetable Protein PG-Propyl Silanetriol, although it carries its own trade name.
The numbers Croda publishes for each grade
The quickest way to see how different these materials are is to compare the data in the Croda guide to biopolymers. Crodasone Cystine has an average molecular weight of about 20,000 Da and a typical active level of 15 percent. Crodasone P and Crodasone W PE both sit at about 50,000 Da, with typical active levels of 20 and 25 percent respectively. Keravis PE is far smaller at about 1,800 Da and 15 percent active.
Molecular weight matters for where the film ends up. Croda's own explanation of protein biopolymers is that high molecular weight proteins form a shield on the cuticle, while low molecular weight proteins penetrate the fibre to give moisture and plasticity. At 50,000 Da, W and P are surface film formers. Cystine is smaller and is described as able to penetrate the cuticle to condition from within as well as bond to hair keratin, which is part of why it is the grade chosen for chemical services.
The pH profiles are the other big divide. Distributor listings of Croda data give Crodasone W an effective pH range of 4.0 to 5.0 and Crodasone P a range of 4.5 to 5.5, with a recommended use of 1 to 5 percent for P. Crodasone Cystine is supplied as a yellow-amber solution at about pH 9.5 with an effective range of 8.5 to 10.0, and the recommended use in finished products is 0.5 to 5 percent. Croda's data sheet, as reproduced by distributors, also notes that when the copolymer is diluted to 2 percent or less in water the solution settles at about pH 5, so a low dose in an acidic base is possible, but the material is at its most comfortable on the alkaline side.
Crodasone Cystine: the grade for chemical services and curl
Cystine is the odd one out in the family, and its strengths come from that. Croda describes it as soluble over a wide pH range in surfactant systems, in thioglycolate and, as the Bunte salt, in sulfite and bisulfite solutions, where a reduction in the copolymer's molecular weight helps it penetrate. That is why it appears in perm lotions, relaxing and smoothing products and colour services rather than only in finishing products. Croda used it this way in its Cystine Hair Smoothing System, which pairs a sulfite and urea smoothing step with high levels of cystine delivered as Crodasone Cystine, so that the heat-activated silanol network adds a protective surface while the amino acid supports the restructured fibre.
Croda also lists excellent curl retention after perming and a gloss benefit, and it states the grade is suitable for all hair care applications including mascaras. In Croda's Curly Conditioner Tress Tamer, a clear styling gel, Crodasone Cystine is used to condition and smooth curly hair alongside Cropeptide W for frizz control. The catch is charge. Crodasone Cystine is polyanionic, and the data sheet notes limited compatibility with cationic surfactants. If your base is a classic cetrimonium or behentrimonium conditioner, test small batches for haze, viscosity drift and loss of conditioning before you commit.
Processing is gentle. Distributor copies of the data sheet say it dissolves in water at temperatures not above 40 C, so add it at cool-down, and store the drum closed and away from light at up to 25 C. We stock this grade as Crodasone Cystine, and it sits in our protein hydrolysates section with the other film-forming proteins.
Crodasone W and P: acidic film formers for heat styling
Crodasone W is the original protein grade of the range. Croda's published work describes its high molecular weight and polymeric structure forming a heat-activated cross-linked film on the hair surface during drying. That film acts as a sacrificial layer against styling heat and helps the look of cuticles that have lost their cement, and Croda reports the effect even from rinse-off systems, with Crodasone W hair resisting cuticle cracking under heat styling in its published test. Croda's product page lists hair colour, rinse-off conditioners, relaxing and perm products, shampoos and styling, and the grade is marked vegan suitable, plant derived and 90 percent natural origin under ISO 16128.
Crodasone P does the same job from pea protein. Croda positions it for protection against cuticle cracking from blow-drying, combing and styling, lists leave-on and rinse-off conditioners, shampoos and styling, and certifies it halal and vegan suitable, with a natural origin content of 80.5 percent for the SB grade. For brands that prefer to keep wheat-derived ingredients off a label, P is the direct alternative to W with a similar molecular weight and the same acidic pH window. If you are interested in how pea peptides behave on the skin side, our article on pea peptide in skin care covers the smaller, non-silicone version of the same plant source.
Both protein grades are happiest between pH 4 and 5.5, which is exactly where most conditioners, masks and leave-in sprays sit. That makes W and P the easier choice for a standard cationic conditioner or a heat protection mist, where Cystine's alkaline preference and anionic character would fight the base.
Reading the suffixes before you order
Croda sells several versions of each grade, and the letters after the name usually describe the preservative system rather than the active. The biopolymer guide lists Crodasone Cystine and Crodasone W PE preserved with phenoxyethanol, with ethylhexylglycerin as an additional additive in the Cystine grade. The SB version of Crodasone P is listed by Croda as free of phenoxyethanol and parabens. Search queries such as crodasone cystine pe or crodasone p sb are really questions about which preservation you get, so match the grade to your own preservative strategy and ask for the product information dossier of the exact code you buy.
Matching a grade to the product you are building
Shampoo and rinse-off conditioner
In a sulfate or mild amphoteric shampoo, all grades are soluble, but Cystine is the most tolerant of anionic surfactants, which makes it a natural fit for a strengthening shampoo. In a cationic rinse-off conditioner at pH 4 to 5, Crodasone W or P is the safer starting point, because they sit inside their effective pH window and avoid the anionic and cationic clash.
Leave-in and blow-dry protection spray
This is the core brief for W and P. A light aqueous spray at about pH 4.5 that is applied before blow-drying lets the silanol network form as the hair is heated. Keep the formula low in heavy oils so the film can form on the fibre, and test on bleached tresses before and after heat. For a vegan or plant-based story, our Hydrolyzed Vegetable Protein PG-Propyl Silanetriol shares the same silanetriol chemistry, and Hydrolyzed Keratin PG-Propyl Silanetriol offers a keratin-based version with a listed pH range of 4.0 to 7.0.
Perm, relaxer and smoothing systems
Here Cystine is the clear choice. Its stability in thioglycolate and sulfite media, its alkaline effective range and its curl retention data are exactly what a chemical service needs. Add it to the reducing or smoothing step as Croda does, and use a separate acidic finishing conditioner, built on W, P or a cationic base, to close the cuticle afterwards.
Curl gels and finishing products
For a clear curl gel, follow Croda's lead and use Cystine with a nonionic or anionic thickener rather than a cationic one. If you also want to restore the slick surface lubrication of the outer cuticle, a separate leave-in with Cutissential 18-MEA complements the film formers, since 18-MEA addresses the fatty layer that bleaching strips away rather than the protein surface.
Common mistakes when switching grades
The first is swapping at the same percentage. Because the typical active levels run from 15 to 25 percent, replacing 3 percent of Crodasone W with 3 percent of Crodasone Cystine puts less copolymer in the bottle, at a very different pH. The second is ignoring charge. Cystine in a strongly cationic conditioner can lose clarity or performance, and the reverse mistake is pushing W or P into an alkaline perm base far outside their effective range. The third is skipping heat in testing. All Crodasone grades are described as heat activated, so evaluate them with a blow-dryer or flat iron step, not only on air-dried tresses. Finally, confirm the INCI and preservative on the certificate of analysis for your lot, because several codes share a trade name. Buyers who source several hair proteins at once can find tips on documentation and pack sizes in our guide to buying peptide and cosmetic ingredients wholesale.
Frequently asked questions
What is the difference between Crodasone Cystine and Crodasone W?
Crodasone Cystine is a cystine and silicone copolymer of about 20,000 Da supplied at about pH 9.5, suited to alkaline, anionic and chemical service products. Crodasone W is a wheat protein and silicone copolymer of about 50,000 Da with an effective pH of 4.0 to 5.0, suited to acidic conditioners and heat protection.
What is the INCI name of Crodasone Cystine?
Croda lists it as Cystine Bis-PG-Propyl Silanetriol (and) Water (Aqua), shown on some documents as Aqua (and) Cystine Bis-PG-Propyl Silanetriol. It does not contain hydrolyzed keratin in its INCI.
How much Crodasone Cystine should I use?
The recommended level in finished products is 0.5 to 5 percent of the supplied solution. Add it to the water phase at or below 40 C and check compatibility if your base contains cationic surfactants.
Is Crodasone P a replacement for Crodasone W?
In most acidic conditioners and styling sprays, yes. Crodasone P is the pea protein version with a similar molecular weight, an effective pH of 4.5 to 5.5 and a 1 to 5 percent use level, and it is certified vegan and halal by Croda.
Try it with a 1 g sample pack
Neat peptide powders in 1 g packs, INCI on every page, shipped from Florida.
Shop peptide powders