Biopeptide Powder

Two natural dipeptides in one powder

Anserine and carnosine are small dipeptides that occur naturally in the body, and both are known in skin care for a protective, antioxidant-style story. Biopeptide Powder combines them. The published INCI on our record is Anserine, Carnosine. Component CAS numbers are 584-85-0 for anserine and 305-84-0 for carnosine. The ratio between the two is confirmed on the CoA for each lot, so check it before you write a label in descending order.

Not the single carnosine grades

We list carnosine on its own as L-Carnosine Powder and N-Acetyl L-Carnosine Powder, and Carnosine, Tocopherol and Milk Thistle Extract Antioxidant Powder is a separate trade active. This page is the anserine and carnosine blend only. If you want a signal peptide instead, Acetyl Hexapeptide-8 Solution or a matrikine is a different class altogether. The full dry range is in our peptide powders.

Working with the powder

Dissolving

Weigh the powder on a calibrated balance, dissolve it completely in a small portion of the formula water before it meets the rest of the batch, and add that premix in cool-down, below 40 °C. Check that the premix is fully clear before you add it.

Compatibility

Keep it away from strong oxidizers and high-ionic-strength systems, such as products very rich in salts. A mild, water-rich base is the safest home.

Level

Take the use level from the supplier documentation for your lot.

Product types that suit it

Protective day serums, urban-skin creams, eye creams, essences and body lotions with a protection story.

Pairing ideas

Vitamin E, ferulic-type antioxidants, niacinamide, sodium hyaluronate and glycerin. Add each active separately and check clarity, odor and viscosity after each addition instead of premixing several actives in one beaker.

Example architecture

The level comes from the CoA, so no gram recipe is shown here.

Claims

Describe skin that looks fresher, more resilient and better protected against daily stress. Keep claims cosmetic and tied to appearance. Any before-and-after statement needs a test on the finished product, not on the raw material.

Testing the finished product

Run a stability check on the finished product at room temperature, at 40 °C and in a fridge for several weeks, and watch color, odor, clarity, viscosity and pH. Check the product in its final pack too, since pumps, droppers and jars expose it to air differently. A preservative challenge test on the final product is the standard step before launch.

Lot handling and storage

Record appearance and pH on arrival, compare them with the CoA, and keep the CoA with your batch records so each finished batch can be traced to its lot. Keep the powder tightly closed and dry, since peptides pick up moisture from the air, and respect the shelf life on the CoA.

Ordering

It is sold as a raw material for cosmetic formulation, not as a finished consumer product. Start with a small pack for bench trials and scale once your stability checks pass. It ships from Florida, usually within 1 to 2 business days, in the pack sizes shown above, and US shipping is free on orders of $50 or more.