BLACK FRIDAY: 20% OFF all liquid peptides, hydrolysates & actives — ends Sunday, Nov 22

Shop the sale
IngredientOSCosmetic ingredients
✓Ships from Florida USA✓Fast US Shipping✓Bulk Orders Available

Matrixyl 3000 OS vs Matrixyl 3000: Choosing the Oil-Soluble or Water-Phase Grade

IngredientOS Team ·

Glass dropper bottle of pale yellow facial oil beside a beaker of whitish opalescent peptide gel, a small balm tin and a digital scale on a white lab bench

Matrixyl 3000 OS is the oil-soluble grade of Sederma's Matrixyl 3000: the same two palmitoylated peptides, Palmitoyl Tripeptide-1 and Palmitoyl Tetrapeptide-7, delivered in an ester and wax carrier instead of a glycerin and water gel. The standard grade goes into the water phase or a cooled emulsion, while the OS grade is added to the oil phase and is built for facial oils, balms, anhydrous sticks and oil-rich creams. Both carry the same recommended use level of 3 percent in Sederma's product literature, so the choice comes down to your base, your label and your process, not to a stronger or weaker peptide.

This guide puts the two grades side by side using the INCI declarations and handling notes that Sederma and its distributors publish, then walks through how to decide, how to process each one and what to do when the grade you want is not the grade you have.

Why Sederma makes the same peptides in two carriers

Palmitoyl Tripeptide-1, also written Pal-GHK, and Palmitoyl Tetrapeptide-7, also written Pal-GQPR, are short peptides with a palmitic acid tail attached. The fatty chain makes them partly lipophilic, but on their own they are fine powders that are awkward to weigh at the tiny levels a finished product needs. Sederma solves that by pre-dissolving them at parts-per-million levels in a carrier, so a formulator can dose a comfortable few percent of liquid instead of a few milligrams of powder.

The carrier decides where the raw material goes in a formula. A glycerin, water and butylene glycol gel belongs in the water phase. An ester and wax base belongs in the oil phase. Croda, which owns Sederma, lists four grades on its Matrixyl 3000 page: the classic Matrixyl 3000, Matrixyl 3000 Free, Matrixyl 3000 OS and Matrixyl 3000 Glyx. Three of them are water-phase materials with different carriers, and OS is the only oil-phase option.

Matrixyl 3000 OS vs Matrixyl 3000 in numbers

INCI declarations

The classic grade is declared as Glycerin (and) Water (Aqua) (and) Butylene Glycol (and) Carbomer (and) Polysorbate 20 (and) Palmitoyl Tripeptide-1 (and) Palmitoyl Tetrapeptide-7. Sederma's product information sheet gives roughly 100 ppm of Pal-GHK and 50 ppm of Pal-GQPR in that gel, with release limits of 90 to 130 ppm and 40 to 70 ppm, a pH of 4.0 to 6.0 and recommended long-term storage at 4 to 7 C. Our Matrixyl 3000 solution carries that full declaration.

The OS grade is declared as C12-15 Alkyl Benzoate (and) Sorbitan Laurate (and) C18-36 Acid Glycol Ester (and) C18-36 Acid Triglyceride (and) Palmitoyl Tripeptide-1 (and) Palmitoyl Tetrapeptide-7. Some distributor listings add lactic acid as a minor component, and the mass balance version listed on CM Studio adds butylene glycol at the front of the declaration. That is a useful reminder that the label you print must follow the document for your actual lot, not a generic web page.

Use level and natural origin content

Sederma's Matrixyl 3000 product sheet gives a single recommended use level of 3 percent and names the OS grade as the oil-soluble option in the same sentence. Distributor data for the OS grade repeats 3 percent, and the CM Studio listing for the mass balance OS grade gives 3 to 4 percent. Croda's page also lists ISO 16128 natural origin content for each grade: 78.49 percent for the classic grade, 80.38 percent for Free, 99.99 percent for Glyx and 10.55 percent for OS. If a natural origin index is part of your marketing, that last figure matters more than any other difference between the two grades, because the synthetic esters in the OS carrier pull the number down sharply.

Appearance, heat and storage

The classic grade is an opalescent, whitish gel. The OS grade is described by distributors as a pale yellow to yellow viscous liquid. Australian distributor New Directions, quoting the OS handling notes, says to add it to the oil phase between 65 and 80 C and that incorporation at up to 80 C is acceptable for a maximum of two hours, with storage below 25 C in an airtight container and no freezing. The classic gel, by contrast, is cold-stored and in practice is stirred into the water phase or a cooled emulsion, as Sederma's own formulation examples show, where it is added after the emulsion is formed and neutralized.

Reading the OS carrier like a formulator

Each ingredient in the OS carrier has a job. C12-15 alkyl benzoate is a light, dry-feeling ester that dissolves many lipophilic actives well and is common in face creams. Sorbitan laurate is a low-HLB emulsifier, which helps the peptides stay dispersed in the oil and lets the material sit comfortably at an oil and water interface in an emulsion. C18-36 acid glycol ester and C18-36 acid triglyceride are long-chain waxy esters that structure the carrier and give it body.

Two practical consequences follow. First, a crystal-clear facial oil may show slight haze from the waxy esters or the emulsifier, especially after a night in a cold room, so run a clarity check at refrigerator temperature as well as at room temperature. Second, the OS grade adds a trace of emulsifier and wax to your oil phase, which is irrelevant in a cream but can change the feel of a very thin dry oil. Neither point is a problem, they are simply things to test before you fill a production run.

Which grade fits which product

Water-based serums and gels

For a clear or lightly hazy water serum, the classic grade is the natural fit. It already contains glycerin and butylene glycol, and its small carbomer and polysorbate 20 load helps it spread evenly. The OS grade would need a solubilizer to stay dispersed in a water serum, which defeats the purpose. Our product card for the classic grade includes a full firming eye gel example built this way, and the IO two-peptide liquid gives the same two INCI peptides under our own name for briefs that do not require the branded material.

Facial oils, balms and anhydrous sticks

This is where the OS grade earns its place. A water-based gel cannot be stirred into a pure oil blend without separating, and adding water to a facial oil brings in the need for an emulsifier and a full preservative system. The OS grade drops straight into a base of caprylic/capric triglycerides, hemisqualane or jojoba oil, and into the melted phase of a balm or lip and eye stick. In anhydrous products it also pairs naturally with other oil-soluble actives such as bakuchiol and vitamin E acetate.

Creams and lotions

In an emulsion either grade works, and the decision becomes one of process and labeling. The classic grade goes in after cooling, which keeps it away from heat but means one more addition at the end of the batch. The OS grade can be weighed into the oil phase at the start and heated with it inside the window described above, which is convenient in a hot-process plant. If your marketing leans on a high natural origin index, the classic grade or Glyx is the better match. If you want an ethoxylate-free label, Croda notes that the classic grade contains polysorbate 20 while Free and OS do not.

Dose math: what 3 percent actually delivers

Because the peptides are present at parts per million, it helps to translate the use level into finished-product terms. In the classic grade, 3 percent of a gel holding about 100 ppm Pal-GHK and 50 ppm Pal-GQPR gives roughly 3 ppm and 1.5 ppm in the final product, about 4.5 ppm of peptide in total. That is the level behind Sederma's in-house test data for the classic grade, and it is why a jar can carry the name prominently while the peptides themselves sit near the end of the INCI list.

Sederma does not publish the OS peptide content on the open pages we reviewed, so do not assume it is identical to the gel. Read the ppm specification on the certificate for your lot of OS and run the same arithmetic before you compare claims across products. If you are weighing Matrixyl 3000 against other signal peptides, our Palmitoyl Tripeptide-38 vs Matrixyl 3000 comparison uses the same finished-product ppm method, and Syn-Coll vs Matrixyl covers the older single-peptide Matrixyl.

Processing each grade without losing performance

Classic gel

Weigh the gel into the water phase of a gel or serum, or into an emulsion that has already been cooled, and stir gently until uniform. Rinse the weighing vessel with a little batch water so the full dose goes in, because a viscous gel clings to glass. Keep long holds at high temperature, strong acids and high levels of free alcohol away from it, and aim for a finished pH roughly between 5 and 7, which suits most peptide serums.

OS grade

Warm the container gently and mix it before weighing, since waxy esters can settle in a cool warehouse. Add it to the oil phase and keep that phase within 65 to 80 C for no longer than two hours, which is easy in a normal emulsion process but worth watching in a slow balm melt. In cold-process facial oils, simply stir it into the room-temperature blend and check that it disperses fully. Because the OS carrier contains no water, it does not need its own preservative in an anhydrous product, but any product that contains water still needs a validated system.

When you only have one grade

Most small labs stock one grade and adapt. If you have the classic gel and want an oil-rich product, the simplest route is a cream or lotion rather than a pure oil, adding the gel to the cooled emulsion. A water-in-oil cream or a rich oil-in-water night cream gives you a luxurious, oil-heavy feel while still offering a water phase for the peptides. If you want to sell a true anhydrous facial oil with these peptides, the OS grade is the right tool, and the classic gel will not substitute for it.

If you prefer to build the pair yourself, the INCI-named Palmitoyl Tripeptide-1 solution lets you set Pal-GHK independently of its partner. Browse all peptide solutions to compare carriers before you commit to a base.

Labeling and claims

Whichever grade you use, list every carrier component on your ingredient declaration in descending order, with the two peptides near the end where their ppm levels place them. Sederma's study figures belong to Sederma's literature and should not be printed as a promise on your finished product. Keep claims cosmetic: smoother-looking skin, a firmer-looking contour and a softer look of fine lines, supported by your own consumer or instrumental testing where you make specific statements.

Frequently asked questions

Is Matrixyl 3000 OS the same peptides as regular Matrixyl 3000?

Yes. Both grades contain Palmitoyl Tripeptide-1 and Palmitoyl Tetrapeptide-7. The difference is the carrier: a glycerin, water and butylene glycol gel for the classic grade, and an ester and wax base with sorbitan laurate for the OS grade.

What use level is recommended for Matrixyl 3000 OS?

Sederma's product sheet gives 3 percent for Matrixyl 3000 and names OS as the oil-soluble option, and the mass balance OS listing on CM Studio gives 3 to 4 percent. Always confirm against the TDS for your lot.

Can I put regular Matrixyl 3000 in a facial oil?

Not in a pure oil blend. The classic grade is a water-based gel and will separate. Use it in a cream or lotion instead, or choose the OS grade for anhydrous oils, balms and sticks.

Can Matrixyl 3000 OS be heated?

Distributor handling notes say it can be added to the oil phase at 65 to 80 C, with incorporation at up to 80 C acceptable for a maximum of two hours. The classic gel is better added to the water phase or a cooled emulsion.

Try it with a 1 g sample pack

Neat peptide powders in 1 g packs, INCI on every page, shipped from Florida.

Shop peptide powders