
SKU: J90140
IO Natural Extract Complex Liquid
Usage Rate: Typical: use the supplied liquid active concentrate at supplier-recommended levels in leave-on formulas, delivering approximately 0.1–0.5% pure active in the finished product (1000–5000 ppm).
Packaging
Liquid sizes — 10 mL sample through bulk (US · metric)
Description
Few raw materials arrive as acidic as IO Natural Extract Complex Liquid. Its card lists a pH of 1 to 2, which tells a formulator two things at once: this complex of natural extracts belongs in renewal-focused products, and it demands careful handling and pH control from the first gram.
Product data
Liquid complex of natural extracts, water-soluble. PH range of the material 1 to 2. The card does not list applications or origin. For this ingredient, the supplier CoA of each lot confirms the exact INCI, composition and recommended level.
Safe handling
A material at pH 1 to 2 can irritate skin and eyes in concentrated form. Wear gloves and safety glasses when weighing it, add it slowly to water, never the other way around, and clean spills promptly. Keep the safety data sheet at the bench.
pH control in the finished product
The finished pH decides how a product feels and how well it is tolerated. Measure the pH after adding the complex, adjust with sodium hydroxide or sodium citrate solution to your target and record the amount of base used. Products for daily home use are usually set well above the raw material pH; professional peels follow the supplier's guidance and local rules.
Product formats
Renewal toner
A toner used a few evenings a week.
Night serum
A light serum for a smoother look by morning.
Professional peel
A salon product applied by trained staff.
Body lotion for rough areas
A lotion for elbows, knees and heels.
Formulating guidance
Dilute the complex into the water phase and adjust pH. Choose acid-tolerant thickeners such as xanthan gum or hydroxyethylcellulose. Pair it with D-Panthenol and aloe vera gel for comfort and niacinamide for radiance once the pH suits it. More plant-based ingredients are listed under botanical extracts.
Claims
Use cosmetic wording such as smoother, brighter, renewed-looking skin. Support numbers with tests on the finished product, and include tolerance testing.
Who the products are for
Customers with dull, rough skin who are used to renewal products, and salons offering peel services.
Sun advice
Renewal routines make daily sunscreen essential. Put a clear sun advice line on the pack.
Introducing the routine
Advise starting two evenings a week and increasing slowly if skin feels comfortable. Tingling is common with acidic products; stinging or redness means the customer should stop.
Packaging
Use acid-resistant plastics or glass, and check that pumps and droppers tolerate the finished pH.
Testing
Run stability at room temperature and 40 °C, checking pH drift, color, odor and viscosity, and confirm packaging compatibility.
Batch quality
Check the pH of each incoming lot, keep the CoA and store retained samples.
Preservation
Choose a preservative that works at your final pH and confirm it with a challenge test.
Range planning
A toner, a night serum and a body lotion form a renewal line for home use.
Original recipe: evening renewal toner, 100 g
Purified water 84.60 g, IO Natural Extract Complex Liquid 4.00 g as an example level per CoA, glycerin 3.00 g, propanediol 3.00 g, panthenol 1.00 g, allantoin 0.10 g, xanthan gum 0.10 g, preservative 0.80 g, sodium hydroxide solution 3.40 g. Disperse xanthan in the glycols and add to the water. Slowly add the complex with stirring, then panthenol, allantoin and preservative. Raise pH to the chosen target with sodium hydroxide solution and record the amount used.
Professional use
Salon peels follow protocols set by the supplier and local regulations, with trained staff, timing and neutralization steps.
Storage
Keep the container tightly closed in a cool, dark place.
Product Specifications
TDS / CoA available on request. Contact us
Frequently Asked Questions
What pH does IO Natural Extract Complex Liquid have?
1 to 2 for the material, according to the product card.
Is it water-soluble?
Yes.
Does the finished product need pH adjustment?
Yes. Always measure and adjust the finished pH to a skin-appropriate level.
Where is the INCI listed?
On the supplier CoA for each lot.



